Choose Language

Technical guide

Yacht Galley Design: A Technical Guide for Gulets, Motor Yachts and Superyachts

By Ercan KeskinPublished on 5 October 202617 min read

In brief

  • Use AISI 316L for sinks, dishwashing areas and anything exposed to salt air; AISI 304 suits enclosed, air-conditioned interior areas such as cabinet carcasses.
  • Domestic appliances often fail within 4–5 years under professional use, and domestic-size cut-outs make later upgrades difficult.
  • REG Yacht Code sets galley ventilation, fryer extinguishing and fire division requirements; confirm exact rules with flag and class at project start.
Contents
  1. 1. What Is a Yacht Galley, and How Does It Differ from a Ship's Galley?
  2. 2. Galley Design by Yacht Type
  3. 3. Layout and Workflow
  4. 4. Safety at Sea: Working on a Moving Floor
  5. 5. Materials: 316L, 304 and Surface Finish
  6. 6. Equipment Selection: Domestic or Professional?
  7. 7. Refrigeration, Provisions and Custom-Size Refrigerators
  8. 8. Ventilation, Hood and Fire Safety
  9. 9. Electrical Load, Weight and Noise
  10. 10. Refit: Renewing an Existing Yacht Galley
  11. 11. Project Process: From Measurement to Handover
  12. 12. Yacht Galley Checklist
  13. Frequently asked questions

Yacht galley design means fitting the output of a restaurant kitchen into a few square metres, on a moving deck, in salt-laden air, a few steps from the guest areas. A well-planned galley keeps the chef fresh, service running smoothly and the equipment trouble-free for years. A poorly planned one usually shows its faults in the first charter season, and putting it right costs far more than doing it properly from the start.

Türkiye is one of the countries where this subject matters most. According to Boat International's 2026 Global Order Book, Türkiye, with 141 projects and a combined length of 6,315 metres, builds more superyachts than any country except Italy. In this article we cover how to design a yacht galley for gulets, motor yachts, superyachts and sailing yachts, from layout and materials to equipment selection and the fire and ventilation rules.

Ercan Keskin, Founder of ONLYMARITIME. Project, fabrication and installation experience in ship and yacht galleys, cold rooms and laundry systems since 2014. The ONLYMARITIME team builds custom-size yacht galleys and custom-size yacht refrigerators in AISI 304/316L stainless steel. In brief: A good yacht galley gives the right answer to five questions: (1) Which yacht type and which service intensity is the galley planned for? (2) Are the chef and the equipment safe underway? (3) Is 316L stainless steel used in the right places in this wet, salty environment? (4) Is the equipment professional, built for continuous use rather than domestic, and compatible with the vessel's voltage and frequency? (5) Do ventilation, fire protection and provision storage meet flag and class requirements? In this article

1. What Is a Yacht Galley, and How Does It Differ from a Ship's Galley?

In maritime usage the kitchen is called the galley (kuzine in Turkish). On a yacht, "the kitchen" is often not a single room but several connected areas:

  • Main galley: The professional working area where meals are prepared and cooked. On superyachts it is usually on the lower or main deck.
  • Pantry: The intermediate area close to the guest saloon and dining area, where plates are finished and kept warm.
  • Crew galley and crew mess: The area where the crew take their own meals, often with a small preparation section.
  • Deck galley and bar: Outdoor areas on larger yachts with a grill, pizza oven or bar station for live service.

Compared with a commercial ship's galley, a yacht galley differs in three respects. The first is expectation: the yacht chef is expected to deliver restaurant-standard food, and the menu may change daily according to the guests' wishes. The second is visibility: on yachts under 30 metres in particular, the galley may be open to the saloon, so aesthetics matter as much as function. The third is space and weight: every centimetre and every kilogram bears directly on the yacht's usable space and performance. For this reason a yacht galley is usually planned around the yacht's own dimensions rather than around standard catalogue sizes.

2. Galley Design by Yacht Type

A "yacht galley" is not one standard space. The galley of a 22-metre gulet and that of a 60-metre superyacht cannot be planned with the same logic. The table below summarises the main requirements for the principal yacht types:

Yacht typeTypical galley layoutKey requirementCommon mistake
GuletUsually below deck, a compact galley worked by one or two peopleEquipment that withstands charter intensity, high cooling capacity, moisture-resistant materialsWood or laminate surfaces in wet areas; domestic refrigerators of insufficient capacity
Motor yacht (approx. 24–40 m)Galley open or semi-open to the saloon; sometimes a separate crew areaBalancing aesthetics with professional performance; quiet refrigerationDomestic appliances chosen for their looks failing early under heavy use
Superyacht (over 40 m)Enclosed professional galley plus pantries, crew galley and cold roomsRestaurant-standard workflow, high provision capacity, compliance with flag and class rulesInvolving the chef too late in the design; inadequate storage
Sailing yachtNear the companionway, amidships or towards the stern, mostly U-shapedSafe working when heeled, gimballed stove, centrally positioned sinkPlacing the galley forward; cupboard and oven doors that do not lock

On sailing yachts the position is especially critical: Practical Sailor's galley guide recommends locating the galley amidships or aft, where motion is felt least, close to the companionway, and placing the sink close to the yacht's centreline so that it drains on either tack.

3. Layout and Workflow

The "work triangle" (storage – preparation – cooking) used in shore kitchens also applies on yachts, but it is not enough on its own. In a yacht galley the deciding factor is the one-way flow of ingredients and plates:

  1. Provision reception: A point where goods arriving in port can be sorted and stored without bringing their dirty packaging into the galley.
  2. Cold and dry storage: Refrigerators, deep freezers, the cold room and the dry store.
  3. Preparation: Sufficient worktop, sink and cutting space.
  4. Cooking: Hob, oven, combi oven and, if needed, a grill.
  5. Service (pass): The point where plates are given a final check and handed out for service.
  6. Dirty return and dishwashing: A separate return route that does not cross the clean service line.

On narrow yachts the most efficient plan is often the U-shaped layout: the chef can stand in the middle, turn to reach every station and, in rough weather, brace against the worktops on both sides. On larger yachts with more than one chef, L-shaped or island layouts allow two people to work without getting in each other's way.

The point most often overlooked in planning is involving the chef in the design. According to an assessment published in SuperyachtNews, around 80 per cent of superyacht galleys are designed without the input of a professional yacht chef. The same article reports that the galley of an 80-metre yacht, whose original design proved inadequate, was rebuilt after delivery at a cost of more than 750,000 dollars. If the yacht's chef has not yet been appointed, it is advisable at least to have an experienced yacht chef or captain approve the layout plan.

4. Safety at Sea: Working on a Moving Floor

The most important difference between a yacht galley and a shore kitchen is that the floor moves. The REG Yacht Code (Red Ensign Group Yacht Code), widely applied to commercial yachts of 24 metres load line length and above, sets out some basic safety requirements for the galley:

  • The galley floor must be non-slip and give a secure footing.
  • All furniture and fittings in the galley must be made of a material that is impervious to dirt and moisture, and metal parts must be corrosion-resistant.
  • If the stove is gimballed, it must be protected by a crash bar to prevent injury, and it must be possible to lock the gimbal mechanism.
  • There must be a means (a safety harness) of securing the cook with both hands free when sea conditions become dangerous.
  • Heavy equipment such as the stove must be firmly secured in place, and the doors of cupboards containing heavy items must be capable of being locked securely.

Beyond the rules, the following details make a difference in practice:

  • Fiddle rails: These barriers along the edges of worktops and stoves stop pots and pans from sliding. They should be removable for cleaning and should not be too high on the preparation worktop, otherwise the wrist is strained when cutting.
  • Pot clamps: Adjustable arms that hold the pot in place on the stove are essential, particularly on sailing yachts and on open-sea passages.
  • Mechanically locked doors and drawers: Magnetic catches open when the yacht heels. Use mechanical latches or push-button locks and drawers on braked runners. The oven door must also be lockable at sea.
  • Rounded corners and grab rails: Worktop corners should be radiused, and there should be a bar the chef can hold on to in a seaway.
  • Fire blanket: The REG Yacht Code also requires a fire blanket to be kept in the galley.

5. Materials: 316L, 304 and Surface Finish

Stainless steel is preferred in a yacht galley for more than its durability. Thanks to its non-porous surface, stainless steel is the most hygienic and easiest-to-clean material in a wet, hot environment. The real question is which grade to use where:

  • AISI 316L: Thanks to its molybdenum content, it is markedly more resistant than 304 to corrosion caused by chlorides, that is, salt water and salty air. It is recommended for sinks, the dishwashing area, areas opening onto the deck, deck galleys and every surface in contact with the outside environment.
  • AISI 304: It can be used, at a cost advantage, in enclosed, air-conditioned interior areas not directly exposed to salty air, for example cabinet carcasses and dry stores.

Workmanship determines corrosion just as much as material quality:

  • Worktop joints should be welded and ground smooth, not sealed with silicone. Gaps trap dirt and are where corrosion starts.
  • Internal corners should be radiused; sharp corners cannot be cleaned.
  • Passivation and proper surface cleaning must be carried out after welding. If heat tint in the weld zone is not removed, even 316L can stain at that point.
  • Contact with carbon steel must be avoided during fabrication. Using the same grinding disc or bench for carbon steel transfers iron to the surface, which returns months later as "rust stains".

In galleys open to the saloon, acrylic composite or natural stone may also be chosen for the visible part of the worktop. In that case, keeping the wet areas, the area around the sink and the cooking zone in stainless steel strikes a good balance between function and aesthetics.

6. Equipment Selection: Domestic or Professional?

One of the most expensive mistakes in yacht galleys is choosing domestic appliances to save space or to match the interior design. Yacht galley specialists speaking to SuperyachtNews stress that the problem is less the marine environment than the intensity of use: domestic hobs used at the pace of a professional yacht galley generally need replacing within 4–5 years. The bigger problem comes when a professional appliance is to be fitted in their place: because the galley was built to domestic dimensions, the new appliance does not fit.

The following principles help when selecting equipment:

  • Induction hob: It gives off less heat to the surroundings, has no open flame, has an easily cleaned surface and works with pot clamps. Gas hobs are not entirely prohibited on yachts, but the REG Yacht Code, for example, requires open-flame gas appliances on yachts of 500 GT and above to comply with the European gas appliances directive or an equivalent, and the installation to meet additional requirements. For this reason many new yachts opt for induction.
  • Combi oven: It saves space by combining steaming, frying and reheating in one appliance. A model that takes Gastronorm (GN) trays shares the same containers with the refrigerator and blast chiller.
  • Dishwasher: An undercounter or hood-type machine is chosen according to the number of guests. Water consumption, water softening and the yacht's freshwater production capacity should be considered together.
  • Auxiliary appliances: Blast chillers, vacuum machines, ice makers and wine cabinets become more valuable as charters get longer.
  • Voltage and frequency: Appliances must match the yacht's electrical system exactly (for example 230/400 V 50 Hz or 60 Hz systems). Connecting an appliance built for 50 Hz to a 60 Hz supply (or vice versa) can cause failures, particularly in equipment with motors and compressors.
  • Service and spare parts: Prefer brands with a service network and spare parts available in the ports of the yacht's cruising area.

For more on marine versions of cooking equipment, see our marine range selection guide and our page on ship and yacht galley equipment.

7. Refrigeration, Provisions and Custom-Size Refrigerators

In a yacht galley, refrigeration capacity is often more decisive than cooking capacity. The amount of fresh produce, frozen food and drink needed for guests and crew during a charter week represents a considerable volume, depending on how often the yacht calls at port. The basic question in capacity planning is not "how many people?" but "how many people, for how many days without calling at port?"

Depending on yacht size, refrigeration is generally arranged in three layers:

  • Galley refrigerators and drawer units: For items used daily, within the chef's reach.
  • Deep freezers: For long-term stock.
  • Cold room and provision store: On larger yachts, for provisions covering a week or longer. For design and capacity calculation, see our ship cold room systems guide.

Standard-size refrigerators on yachts often do not fit the available space exactly; the few centimetres left over are both lost space and a gap that collects dirt. A custom-size refrigerator solves this problem: the body is fabricated in 316L or 304 stainless steel to fit the existing recess, the internal shelves are planned around GN containers, and the door hinge side is chosen to suit the galley workflow. The compressor and condenser are positioned so that their heat and noise do not reach the galley or the guest cabins, and where appropriate a remote condensing unit is preferred. For more on marine refrigerators and cold rooms, see our page on ship cold room systems and marine refrigerators.

In the REG Yacht Code fire table for yachts of 500 GT and above, cold rooms and refrigerated stores with an area of 4 m² or more are classified as "high-risk service spaces". The size of the cold room therefore also affects the design of the fire compartment and should be settled at the start of the project.

8. Ventilation, Hood and Fire Safety

In a small space, the oven, hob and dishwasher heat the environment quickly; inadequate ventilation reduces the chef's performance and lets odours and grease vapour spread to the guest areas. In terms of fire, the galley is one of the riskiest spaces on a yacht after the engine room. The REG Yacht Code contains concrete requirements on this:

Ventilation

  • For enclosed galleys without air conditioning, at least 20 air changes per hour of mechanical fresh-air supply and 30 air changes per hour of mechanical extraction are specified.
  • The galley ventilation fans must be capable of being stopped from outside the galley, and the main vents must be capable of being closed from outside.
  • If galley extract ducts pass through accommodation spaces, they require fire insulation, automatic fire dampers and the means for fixed extinguishing inside the duct.
  • On yachts of 500 GT and above, the stove extract duct must have a grease trap that is easily removable for cleaning, and a means of stopping the fans. If the duct passes through accommodation spaces, it additionally requires A-class duct construction, fire dampers and fixed extinguishing inside the duct; the extinguishing, fan and damper controls must be grouped at a single point just outside the galley entrance.

Deep fat fryers and fire extinguishing

  • For deep-fat cooking equipment, the REG Yacht Code refers to the fixed extinguishing requirements in SOLAS II-2/10.6.4. These systems are tested to ISO 15371.
  • For fryers with an oil capacity of up to 15 litres, an appropriately sized Class F fire extinguisher together with manual isolation of the electrical supply may be acceptable.
  • Where several fryers are installed side by side, they are treated as a single fryer when the oil capacity is calculated. Placing two small fryers next to each other is therefore not a way around the fixed extinguishing requirement.

Fire compartment

On yachts under 500 GT, except yachts under 300 GT in the short-range category, the galley is required to be enclosed by "B-15" class fire divisions. This requirement also affects the planning of cabins and corridors close to the galley.

These points are summarised on the basis of the REG Yacht Code (July 2024 edition, Part A). If your yacht is under a different flag, a different yacht code or class society rules, the applicable requirements may differ. Exact requirements should be confirmed with the flag administration and the class society at the start of the project.

9. Electrical Load, Weight and Noise

In a professional yacht galley, running the induction hob, combi oven, dishwasher and refrigeration at the same time creates a significant electrical load. The galley's total connected load and the appliances that will run simultaneously should be given to the electrical engineer before the generator and switchboard are designed. In projects where the galley equipment list is finalised late, it is common to find there is not enough power for an appliance added afterwards.

Weight is particularly important on performance motor yachts and sailing yachts. In stainless steel furniture, sheet thickness is optimised in non-load-bearing panels, while load-bearing areas such as worktops and suspension points are strengthened with reinforcing profiles. In this way strength is maintained without adding unnecessary weight.

Noise and vibration directly affect guest comfort. Appliances with compressors should be mounted on anti-vibration mounts, and hood fans and condenser units should be positioned so that they do not transmit noise to the cabins.

10. Refit: Renewing an Existing Yacht Galley

Alongside newbuilds, galley refits on existing yachts are a common job. Renewing the galley of an existing yacht presents different challenges from designing one from scratch:

  • Getting the equipment in: This is the point most often overlooked. The new worktop or refrigerator must pass through the yacht's doors, stairs and hatches. For this reason refit equipment is often built in modular sections and assembled on board.
  • On-site measurement and templates: No wall in a yacht hull is perfectly flat and square. Measurements should be taken on board rather than from drawings, and templates should be made for critical areas.
  • Existing services: If the positions of the water, waste water, electrical and ventilation connections are retained, cost and time are reduced significantly.
  • Yard schedule: Fabrication should be planned around the time the yacht will spend in the yard, and installation should be scheduled so that it does not clash with other refit work.

11. Project Process: From Measurement to Handover

The ONLYMARITIME team runs custom-size yacht galley projects in the following steps:

  1. Survey and needs analysis: Yacht type, number of guests and crew, charter profile and menu structure; where possible, a discussion with the chef and captain.
  2. On-site measurement: For newbuilds, from the general arrangement plan; for refits, exact measurements and templates taken on board.
  3. Layout and fabrication drawings: Workflow, equipment layout, service points and material selection (316L / 304).
  4. Equipment list and electrical load table: Equipment compatible with the yacht's voltage and frequency, with total power and connection details.
  5. Approval: Approval by the owner, captain, designer and shipyard.
  6. Fabrication: Workshop production of stainless steel furniture, custom-size refrigerators and auxiliary equipment, including welding, surface finishing and passivation.
  7. Installation and commissioning: Installation on board, connections, testing and briefing the crew on use.

12. Yacht Galley Checklist

Before design approval, the answer to each of the following questions should be clear:

  • How many people will the galley serve, and for how many days without calling at port?
  • Has the chef or an experienced captain seen the layout plan?
  • Is the flow from provision reception to dishwashing one-way, with clean and dirty lines kept separate?
  • Are all surfaces exposed to wet and salty air in 316L?
  • Are the worktop joints welded and the internal corners radiused?
  • Are fiddle rails, pot clamps, mechanical locks and a chef's safety harness in the plan?
  • Is the selected equipment professional grade and compatible with the yacht's voltage and frequency?
  • Has the total electrical load been given to the electrical engineer?
  • Do the ventilation, extract duct, grease trap and fryer extinguishing arrangements comply with flag and class rules?
  • In a refit, can all the components pass through the doors and hatches?

Have a yacht galley project?

Newbuild or refit; gulet, motor yacht or superyacht. Let us assess your requirements together for the layout plan, custom-size stainless steel galley and refrigerator.

Sources

Frequently asked questions

What is a yacht kitchen called?

On yachts and ships the kitchen is called the galley. The service kitchen close to the guest area is called the pantry, and the area where the crew eat is called the crew mess.

Which stainless steel should be used in a yacht galley?

AISI 316L is recommended for sinks, the dishwashing area, deck galleys and outdoor areas that come into contact with salt air and water. In enclosed, air-conditioned interior areas, for example cabinet carcasses, AISI 304 can be used at a cost advantage. Welding, surface finishing and passivation quality determine corrosion resistance as much as the material grade.

Should a yacht have a gas hob or an induction hob?

Gas hobs are not entirely prohibited on yachts, but open-flame gas appliances and gas installations are subject to additional rules. Induction hobs are increasingly preferred on new yacht projects because they give off less heat, have no open flame and are easy to clean. The final decision should be made according to the yacht's flag and class rules.

Can domestic appliances be used in a yacht galley?

They can, but in a galley working continuously at charter intensity, domestic appliances may fail quickly. If the galley is also built to domestic dimensions, the furniture may have to be changed later to fit professional appliances. On heavily used yachts, professional appliances matched to the yacht's voltage and frequency are therefore recommended.

Can a custom-size refrigerator be made for a yacht?

Yes. A custom-size refrigerator is fabricated in stainless steel to fit the space available on the yacht, with internal shelves planned around GN containers and the door opening direction planned around the galley workflow. ONLYMARITIME builds custom-size refrigerators for yachts in 316L and 304 stainless steel.

Does a yacht galley fryer need a fire extinguishing system?

The REG Yacht Code refers to the SOLAS fixed extinguishing requirement for deep fat fryers. For fryers with an oil capacity of up to 15 litres, an appropriately sized Class F fire extinguisher and manual isolation of the electrical supply may be acceptable. Fryers installed side by side are calculated as a single fryer.

How long does a yacht galley refit take?

The duration depends on the size of the galley, whether the equipment is ready-made or custom-built, and the yacht's yard schedule. The most important step is to complete measurement and approval before the yacht enters the yard. Fabrication can then be done in advance, leaving only removal and installation time on board.

EK
Ercan Keskin
Founder of ONLYMARITIME

Ercan Keskin has worked in the maritime sector since 2014: galley design for naval, commercial and yacht projects, technical drawing, purchasing, installation and after-sales service. He founded ONLYMARITIME in 2020. LinkedIn

Send us your drawing or equipment list

Tell us the vessel type, the electrical data and the delivery port, and we will come back to you with a technical and commercial proposal.

Chat on WhatsApp