Choose Language

Galleys, cold rooms and laundries for cruise ships

Thousands of meals a day, inspected hygiene and short port calls: technical spaces designed for continuous production.

Continuous productionInspected hygieneSeparate flowsRefit in dry dock

A cruise ship galley works like a central kitchen: continuous production, several restaurants and pantries, large-capacity provision stores and a laundry handling passenger and crew linen. Sanitary inspections are frequent, and a design flaw is paid for throughout the vessel's service life.

We design layouts, select equipment and fabricate the stainless steel outfitting with a simple aim: a production flow with no crossing paths, surfaces that are easy to clean and equipment the crew can maintain.

Looking for a specific item of equipment?

The marine equipment catalogue for this vessel type is available on 60HzStore, our procurement platform.

View the 60HzStore catalogue →

What we deliver for this vessel type

Constraints specific to this vessel type

Hygiene

Cruise ships are often built to sanitary standards such as the USPH Vessel Sanitation Program (VSP): smooth surfaces, sealed joints, no dead corners, cleanable plinths and feet.

Production flow

Separation of clean and dirty flows, and of raw and cooked products; trolley circulation with no crossing between receiving, storage, preparation, cooking and service.

Rapid chilling

Blast chillers are sized to the volumes produced, so that chilling times are met.

Refit without a prolonged stoppage

Work is planned for the dry-dock period and each item is sized to pass through the vessel's existing access routes.

Power and extraction

Installed loads and extraction flow rates are coordinated with the shipyard from the design stage.

Standards and requirements to consider

RequirementWhat it meansOur approach
USPH – Vessel Sanitation ProgramConstruction requirements for food-area hygieneStainless steel fabrication details designed for inspection: continuous welds, rounded corners, smooth surfaces
SOLAS Chapter II-2Fire protection of the galley and extraction ductsHoods and ducts coordinated with the shipyard; fryer protection in accordance with ISO 15371
MLC 2006Food and catering for the crewSpaces and storage sized for the crew as well as passengers
Shipboard electrical supplyHigh loads, the vessel's voltage and frequencyEquipment suited to the supply; load schedule passed to the shipyard

[ Our method ]

From survey to after-sales service: a single point of contact

Galley, cold rooms, laundry and stainless steel are handled as one project, from the specification through to the vessel in service.

01

Survey and specification review

Survey on board or from the shipyard's drawings; review of the specification: crew numbers, endurance, electrical supply, classification society requirements.

02

Equipment suited to the shipboard supply

Equipment compatible with the vessel's electrical supply (for example 440V 60Hz), certified or proven on naval and civilian projects.

03

Layout and workshop drawings

Layout of the galley, cold rooms and laundry; worktops drawn to the project's dimensions, not to the standard sizes of a shore-side kitchen.

04

Fabrication in AISI 304L / 316L stainless steel

Fabricated at our Gebze workshop: worktops, sinks, shelving and cabinets, with sea rails and deck fixings.

05

Installation and commissioning

Installation on board, connections, testing and commissioning in line with the shipyard's programme.

06

After-sales service planned from the outset

Onboard spare parts list, manuals and wiring diagrams delivered, remote troubleshooting with the crew by photo and video, OEM references to source parts in any port.

[ Frequently asked questions ]

Frequently asked questions

Do you work on cruise ship refits?

Yes. We study the existing drawings, propose a new layout and size each item to pass through the vessel's access routes, taking account of the length of the dry-dock period.

Is your stainless steel outfitting suitable for sanitary inspections?

Our worktops, sinks and shelving are designed for cleaning: smooth surfaces, rounded corners, no dead corners. The requirements of the project's standard are carried into the workshop drawings.

Can you handle the cold rooms and laundry as well as the galley?

Yes. Galley, cold rooms, laundry and stainless steel outfitting form a single project, which simplifies coordination with the shipyard.

What information do you need for an offer?

The drawings of the space, the number of passengers and crew, the shipboard electrical supply and the classification society. Without drawings, we carry out a survey.

Send us your drawing or equipment list

Tell us the vessel type, the electrical data and the delivery port, and we will come back to you with a technical and commercial proposal.

Chat on WhatsApp