Choose Language

Technical guide

Marine Galley Ranges: What They Are and What to Check When Choosing One

By Ercan KeskinPublished on 26 March 20265 min read

In brief

  • A marine galley range combines roll-resistant flanged mounting, fiddle rails, AISI 304/316 stainless steel and 440V/60Hz compatibility; land kitchen equipment is not made for these conditions.
  • AISI 304 suits enclosed galleys; AISI 316 is preferred on offshore and open-sea vessels because its molybdenum content improves corrosion resistance.
  • Electric ranges ease fire safety and class compliance but stop in a power cut; gas keeps working but needs cylinder storage and detectors.
Contents
  1. What Is a Marine Galley Range?
  2. Electric or Gas? A Comparison
  3. Technical Selection Criteria
  4. Reference Capacity and Power Values
  5. Pre-Purchase Checklist
  6. 4 Common Mistakes to Avoid
  7. Frequently asked questions

⚓ Expert Guide

Feeding a crew that spends long periods at sea is an operational necessity. Choosing the right marine galley range is a critical decision for equipment life, energy efficiency and survey compliance. In this guide we cover the selection criteria, the technical specifications and the most common mistakes.

What Is a Marine Galley Range?

A marine galley range is an industrial cooking unit designed specifically for maritime conditions. It differs from land kitchen equipment in the following key features:

  • Roll and motion compensation: Fiddle rails above the hob and locking pot holders prevent pots from toppling.
  • Flanged deck fixing: The equipment is permanently mounted to the ship's deck and does not move in heavy weather.
  • Salt and humidity resistance: The body is made of AISI 304 or 316 stainless steel and withstands the corrosive effect of the marine environment.
  • Compact and modular design: It is optimised for restricted galley space; combination units and modular arrangements are possible.
  • 440V / 60Hz compatibility: The great majority of commercial ships operate on this voltage and frequency standard; the equipment must be compatible.

Electric or Gas? A Comparison

The most critical decision in selecting a marine galley range is the energy system. The table below summarises the key differences between the two systems:

Criterion ⚡ Electric 🔥 Gas
Fire safetyHigh, no gas leak riskMedium, detector and ventilation mandatory
Energy consumptionHigh (5–45 kW)Low, LPG is an efficient fuel
Infrastructure requirementA 440V/60Hz electrical line is sufficientCylinder storage area + detector
Maintenance frequencyLow, few moving partsMedium, valve and connection checks
Class complianceEasier, SOLAS fire rulesMay require additional certification
In a power cutDoes not workContinues to work
Suitable vesselNewbuild, yacht, ferryOffshore, fishing vessel, older ship

Industry Observation In Turkish shipyards, demand for electric marine galley ranges is rising, particularly in newbuild projects. IMO's greenhouse gas (GHG) emission reduction targets support this trend. In retrofits of existing ships, however, gas systems are still preferred for practicality.

Technical Selection Criteria

01 Material Quality

AISI 304 is the minimum standard for general use. On offshore and open-sea vessels, AISI 316 should be preferred. 316 is more resistant to salt air containing chlorides.

02 Voltage / Frequency

The great majority of commercial ships operate on a 440V / 60Hz system. The equipment must be compatible with this. 230V / 50Hz is common on yachts; a ship-specific check is essential.

03 Fiddle Rails

The adjustable fiddle rail system must accommodate different pot diameters. In rolling conditions it is the primary line of defence against accidents.

04 Certification

Lloyd's Register, DNV GL, Bureau Veritas or Türk Loydu. For ships trading in national waters, Türk Loydu approval is often sufficient. Clarify this in advance according to the trading area.

Reference Capacity and Power Values

The table below shows general reference values by crew size. These values are not a binding standard; they are a guiding framework for preliminary planning. For exact capacity determination, your ship's galley plan, shift pattern and menu structure must be assessed together.

Crew Range (kW) Oven (Litres) Fryer (Litres) Total (kW)
10 – 15 persons5 kW (2 plates)~40 L~10 L10–12 kW
20 – 25 persons7 kW (2 plates)~60 L~15 L15–18 kW
40 – 50 persons15 kW (4 plates)80–100 L~20 L25–30 kW
80 – 100 persons30 kW (6 plates)160 L (2 units)~40 L45–55 kW
150+ persons45+ kW (8 plates)240+ L (3 units)60+ L70+ kW

* Reference values vary with vessel type, menu structure and shift pattern. For a project-specific calculation, consult the ONLYMARITIME team.

Pre-Purchase Checklist

Have the following information ready before ordering a marine galley range; it helps you obtain the right quotation and avoids installation problems:

  • Number of crew and daily number of meals (breakfast / lunch / dinner)
  • Vessel type (cargo, ferry, offshore, yacht, fishing)
  • Existing electrical system: voltage and frequency (440V/60Hz? 230V/50Hz?)
  • Galley dimensions (length × width × deckhead height)
  • Required certification: Türk Loydu / Lloyd's / DNV GL / BV
  • Energy system preference: electric or gas?
  • Refit or newbuild?
  • Service region and port access

4 Common Mistakes to Avoid

1 Using land kitchen equipmentIt cannot withstand roll, humidity and vibration loads. It is both a safety risk and grounds for a non-conformity at survey. 2 Ignoring voltage / frequency incompatibilityConnecting 230V/50Hz equipment to a 440V/60Hz system damages both the equipment and the electrical installation. Always confirm before ordering. 3 Skipping certificationUncertified equipment found at inspection can detain the ship in port. This cost can far exceed the saving on the equipment. 4 Buying from a company without a service networkEquipment without service support in port cities causes serious operational loss when it breaks down.

Selecting the right marine galley range requires material, voltage compatibility, certification and installation support to be assessed together. To see all of our equipment options, visit our marine galley equipment page.

A Galley Range Solution for Your Ship

Send us the technical details and your galley dimensions, and we will prepare a project-specific recommendation.

Frequently asked questions

What is the difference between a marine galley range and a normal industrial range?

A marine galley range differs from a standard industrial range through its roll-resistant flanged mounting, fiddle rails, AISI 304/316 stainless steel body, 440V/60Hz compatibility and marine certification. Land kitchen equipment is not made for conditions at sea, and using it is non-compliant with regulations.

Should I choose AISI 304 or AISI 316?

AISI 304 is sufficient for general use in enclosed galley spaces. AISI 316 should be preferred in offshore and open-sea environments with high chloride content. The molybdenum content of 316 significantly increases corrosion resistance.

Why do 440V / 60Hz matter?

The electrical system of commercial ships operates at the international standard of 440V / 60Hz. Equipment incompatible with this voltage and frequency either does not work or fails quickly. The ship's electrical system must be confirmed when ordering.

When is Türk Loydu certification sufficient?

Türk Loydu approval is sufficient for Turkish-flagged ships trading in Turkish national waters. For ships on international voyages, a Lloyd's Register, DNV GL or Bureau Veritas certificate is required. The flag state and trading area are decisive.

What should be checked when replacing a marine galley range in a refit?

Check whether the existing electrical installation can meet the power requirement of the new equipment, measure the galley dimensions, identify the deck connection points and re-evaluate the certification requirement for the new equipment.

Are electric or gas ranges preferred on offshore platforms?

Both are used on offshore platforms. On large platforms, where high electrical capacity is available, electric is increasingly preferred. On smaller support vessels, gas systems are still common. The platform's power infrastructure is decisive.

How much do marine galley ranges cost?

Prices vary considerably with variables such as number of plates, energy system (electric/gas), material quality (304/316), certification requirements and brand. You can contact us for a quotation specific to your ship.

Do you offer installation and service?

Yes. In addition to equipment supply, ONLYMARITIME provides on-board installation, commissioning and periodic maintenance, for shipyards in Türkiye and on export projects worldwide.

EK
Ercan Keskin
Founder of ONLYMARITIME

Ercan Keskin has worked in the maritime sector since 2014: galley design for naval, commercial and yacht projects, technical drawing, purchasing, installation and after-sales service. He founded ONLYMARITIME in 2020. LinkedIn

Send us your drawing or equipment list

Tell us the vessel type, the electrical data and the delivery port, and we will come back to you with a technical and commercial proposal.

Chat on WhatsApp